Subaru WRX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi guys, I have a 2011 wrx sti hatchback. wondering if anyone has info on how to route the wiring harness for the headlights horn airbag sensors etc. my son brought it to me with the harness pulled over to the drivers side. any help would be greatly appreciated.
 

·
Registered
Joined
·
1,637 Posts
If the harness has been completely removed then the stock rout location for the USDM 2008-2014 is on the passenger side of the firewall. It may help to lookup photos of the stock engine bay on that model year but theres a few very large boots that go through oval shaped holes in the firewall. The OE wiring also passes through the driver side wheel well down by the dirvers feet. I know its not a ton of detail but I hope it helps.
 
1 - 2 of 2 Posts
Top