First time posting but has any one had an issue with their AP V3 not turning on? I recently updated the firmware and mid way through, the accessport shut off and never came back on. Any ideas on how to fix this?
My 2005 wrx has currently a vf29. But here's my problem it has a bad seal and is making the car smoke. My question is do I replace it with another vf29? Or get a bigger one. Can I get another vf29 and not have to get it retuned?
I recently bought a 2010 wrx, the car has no accessport although there is a Cobb intake and down pipe with a stock exhaust. No ecu or driveability issues, pulls strong. There was no boost guage either.
I put on a cat back, added the boost guage today full boost is 15psi.what...
I have the cobb accestuner and i remember reading there is a way to come close to create a antilag like sound from 2 step. I know cobb does fuel cut but how can i get close to ignition cut/afterfire? To get that popping sound? I already understand all consequences.
Subaru WRX 2017 - Stage 1+ 91 Octane Map (COBB Big SF Intake Installed)
Hi, just yesterday I installed a Axle back (muffler delete). When I took my car out for a 20 minute drive (cruising not WOT), I noticed these on my monitors.
Feedback Knock: -3.87/0.00 (Sitting at 0 idle or cruising...
this action is done when you are useing stage 2+ and not reaching your target boost only
DO NOT ADJUST WHILE STOCK OR STAGE 1( it is not needed)
1: Remove C-CLIP from the WG Actuator DO NOT DROP THE C-CLIP
2: Loosen the WG Adjuster nut with 10mm wrench
3: Remove the Adjuster from the WG...