Subaru WRX Forum - View Profile: psinuse
psinuse is a WRX expert worth listening to psinuse is a WRX expert worth listening to psinuse is a WRX expert worth listening to psinuse is a WRX expert worth listening to psinuse is a WRX expert worth listening to

psinuse psinuse is offline

WRXtuners Member

  Visitor Messages

Showing Visitor Messages 1 to 7 of 7
  1. AllExtinct
    09-05-2014 04:18 PM - permalink
    AllExtinct
    I seen that IA performance had a harness for plug and play with AVCS as well.
    I didnt look into any reviews on it though just glancing around and came across it.
    Is it true that compresstion ratio is higher on JDM than USDM?
    I seen alot of debate on it but never found a solid amswer on it?
  2. AllExtinct
    09-05-2014 11:00 AM - permalink
    AllExtinct
    No I didnt get the AVCS. I didn't want to mess around with wiring and such that much so I went with just a non AVCS.
    I looked at the engines that had it though and they where kinda out of my budget range.
  3. LW_Black4
    08-20-2014 10:56 AM - permalink
    LW_Black4
    Kieth,
    Finally received my built motor. Details including spec sheet in the post: "GROUNDED - Starting an EJ205 Rebuild".

    Would love to know what you think,


    LW_Black4
  4. BoostinChick
    08-17-2012 08:43 PM - permalink
    BoostinChick
    I have that site bookmarked for such occasions ;)
  5. Ridge10
    08-07-2012 07:18 PM - permalink
    Ridge10
    Yes, Im still using the os map.
  6. man show
    07-26-2012 11:00 AM - permalink
    man show
    I hear ya.. when I'm ready for the next step, I have a feeling it will be something along those lines.
  7. man show
    07-24-2012 07:37 AM - permalink
    man show
    I'm really happy with it. I think it's the perfect turbo for a daily driven Subaru with a 2.5L engine.

  About Me

  • About psinuse
    City
    belpre
    State/Country
    Ohio
    WRX Club Region
    Mid Atlantic
    WRX Model
    WRX
    WRX Year
    03
    Mods-speed
    TD06 20g
    GMBCS<---buy a grimmspeed 3 port...grrrr!!!!
    STi Up-pipe
    Invidia Down-pipe
    Denso 850cc injectors
    Surewin cat back
    JDM STi TMIC(madtytejdmshitzyo!)
    Perrin LWCP
    TGV deletes
    Perrin turbo inlet.
    Mods - engine
    Destroked 2.5L(2.34L)
    Wossner 100mm pistons w/ rings
    Stock STi rods
    Stock 04 WRX crank 75mm
    08 STi 11mm oil pump shimmed
    03 WRX heads
    STi Spec C cams
    Supertech springs
    Clevite bearings main and rod.
    stock everything else.
    Mods - drivetrain
    Kart Boy STS
    SouthBend/Dxd HD Stage 1
    08 LGT gearset.
    Mods -suspension
    2003 STi Spec C Springs 257lbsF/217lbsR(USDM STi rates 224F/195R)
    2003 STi Spec C lateral links
    2003 STi Spec C trailing arms
    2003 STi Spec C endlinks
    2003 STi Spec C sway bars 21mmF/21mmR
    2003 STi Spec C struts F/R
    ASC 16" black multispoke wheels
    Dunlop 235/50/16
    Parts Wishlist
    Money
    Racing Series
    Autocross, Rallycross, Open Track Events, Road Racing, Drag Racing
    1/4 ET
    0.000
    1/4 MPH
    0
    1/8 ET
    7.830
    1/8 MPH
    89.61
    60' time
    1.73
    Turbo Type (Timeslip)
    TD06 20g
    Boost Level (Timeslip)
    20
    Pump or Race Gas? (Timeslip)
    Pump gas
    Tires (Timeslip)
    Street Radials
    Race weight (Timeslip)
    3143
    Tranny type (Timeslip)
    5-speed
    Track Name (Timeslip)
    Kanahwa Valley Dragway
    Density Altitude (Timeslip)
    310
    Dyno HP #
    ????
    Dyno Torque #
    ????
    Turbo Type (on Dyno)
    20g
    Boost Level (on Dyno)
    21
    Pump or Race Gas (on Dyno)
    Pump gas
    Nitrous? (on Dyno)
    No Nitrous
    Occupation
    Worker Bee
    Other Interests
    anything that keeps me busy
    Background
    Nothing much, but I'm happy.
  • Signature
    Resident Grumpy Old Man(Keith)
    03 SRP 2.34L now with Spec C goodness
    08' LGT Gears...

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Today 12:10 PM
  • Join Date: 11-06-2004

  Friends

Showing Friends 1 to 10 of 11
  • arewmors
    • arewmors is offline
  • basco
    • basco is offline
    • Send a message via MSN to basco
    • Send a message via AIM to basco
  • black beast2
    • black beast2 is offline
  • BLAZE2099
    • BLAZE2099 is offline
  • boo-key
    • boo-key is offline
  • daddysfastcar
    • daddysfastcar is offline
  • Fidrat
    • Fidrat is offline
  • LW_Black4
    • LW_Black4 is offline
  • MisfittedGal
    • MisfittedGal is offline
  • newtothegame
    • newtothegame is offline
    • Send a message via Yahoo to newtothegame

  Mentions

07-04-2015
10:59 PM - LW_Black4 mentioned psinuse in post [post=520282]Lost another Subaru WRX motor at Mosport GP (big track)[/post]
... at 8000rpm Thanks psinuse for helping me selec...
05-20-2015
10:30 AM - arcticscythe mentioned psinuse in post [post=511697]What To Do First[/post]
...** - credit goes to psinuse for bringing it up -...
01-12-2015
03:57 PM - boo-key mentioned psinuse in post [post=491482]Boo's build journal and introduction[/post]
...mpy old man. Thanks psinuse ! My y-pipe was ripp...
12-24-2014
07:28 PM - boo-key mentioned psinuse in post [post=488722]Merry Christmas![/post]
...sc Epictofer Vew psinuse GSMNZ LW_Black4 t...
12-22-2014
02:38 PM - BLAZE2099 mentioned psinuse in post [post=488489]Trying to find parts[/post]
psinuse
12-08-2014
01:47 PM - arcticscythe mentioned psinuse in post [post=486625]Td04 boost question.[/post]
psinuse , thanks I couldnt r...
11-07-2014
05:59 PM - BLAZE2099 mentioned psinuse in post [post=481130]TD05 16G turbo from eBay?[/post]
psinuse
10-29-2014
07:22 PM - BLAZE2099 mentioned psinuse in post [post=478754]2015 tail of the dragon annual boxer takeover[/post]
...er to meet up with psinuse

  Thread Tags

No results to display...

  Quotes

06-19-2015
05:31 PM - psinuse quoted sleepr in post [post=518521]Whiteline Anti Lift Kit Handling Upgrade[/post]
*gasp!* this is the type...
06-18-2015
11:30 PM - psinuse quoted titter in post [post=518394]Whiteline Anti Lift Kit Handling Upgrade[/post]
how did this turn out? woul...
11:21 PM - psinuse quoted 03wrxguy in post [post=518386]2003 wrx vf39 swap[/post]
Ok so I just had a vf39 sti t...
06-14-2015
07:36 PM - titter quoted psinuse in post [post=517634]Whiteline Anti Lift Kit Handling Upgrade[/post]
So I am going to throw this ...
06-04-2015
08:08 PM - psinuse quoted GSMNZ in post [post=516106]Motor Build[/post]
Well I had an issue during...
01:38 PM - psinuse quoted titter in post [post=516034]Turbo and injectors[/post]
VF 43, Walbro255 Pump, and ...
06-03-2015
09:23 AM - GSMNZ quoted psinuse in post [post=515706]Guess my numbers![/post]
I'm gonna have to agree with...
06-02-2015
09:44 PM - psinuse quoted mosc in post [post=515650]Guess my numbers![/post]
... have to agree with mosc on this, seems that ...
07:00 AM - GSMNZ quoted psinuse in post [post=515434]Guess my numbers![/post]
Stock BPV I assume and one s...
05-31-2015
07:54 PM - titter quoted psinuse in post [post=515018]GSMNZ - My 05 WRX Wagon Build[/post]
^^This. I use Open Source st...
07:42 PM - psinuse quoted Imthatbyrd in post [post=515010]Turbo and injectors[/post]
So you're saying by the kit ins...
07:38 PM - psinuse quoted Haw1es in post [post=515002]GSMNZ - My 05 WRX Wagon Build[/post]
If im not mistaken, psinuse...
04:58 PM - titter quoted psinuse in post [post=514962]GSMNZ - My 05 WRX Wagon Build[/post]
I was pushing 300+ for many ...
03:56 PM - psinuse quoted titter in post [post=514930]GSMNZ - My 05 WRX Wagon Build[/post]
im interested to see what i...
05-24-2015
07:38 PM - psinuse quoted Fidrat in post [post=513529]GSMNZ - My 05 WRX Wagon Build[/post]
That's the last oil on eart...
05:11 PM - Fidrat quoted psinuse in post [post=513521]GSMNZ - My 05 WRX Wagon Build[/post]
I've always run Pennzoil 5w3...
03:40 PM - psinuse quoted Haw1es in post [post=513513]GSMNZ - My 05 WRX Wagon Build[/post]
So I dont want to turn this...
03:39 PM - psinuse quoted Fidrat in post [post=513505]GSMNZ - My 05 WRX Wagon Build[/post]
I thought this was the 11th...
07:07 AM - Fidrat quoted psinuse in post [post=513433]GSMNZ - My 05 WRX Wagon Build[/post]
Okay I have to ask...Why syn...
06:23 AM - psinuse quoted GSMNZ in post [post=513425]GSMNZ - My 05 WRX Wagon Build[/post]
Conventional breaks down f...

  Feedback Score

iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
View Complete Feedbacks for psinuse
  Past
Month
Past
6 Months
Past
12 Months
 Positive 0 0 0
 Neutral 0 0 0
 Negative 0 0 0
 
For the best viewing experience please update your browser to Google Chrome