Sorry about the lack of pics. The cell phone camera pics came out bad... take off the 2 screws on the cluster plastic piece on top. REMOVE. Remove the 3 bolts attaching the OEM cluster to the body. . 2 on the bottom and 1 on the top. The hardest part is the 3 OEM wire connectors........ The oem clips are soo hard to unclasp/Oh well. The new cluster is a direct plug and play..... The only drawback is that the Outside temp sensor show up ... ---*C... I need the outside probe and sender.
Last edited by Jmoney007; 02-07-2004 at 02:07 PM.