Subaru WRX Forum (http://www.wrxtuners.com/forums/)
- Bolt-on Tech (EJ255/EJ257 2.5L '04-07 STi and '06-07 WRX) (http://www.wrxtuners.com/forums/f75/)
- - Vacuum Lines (http://www.wrxtuners.com/forums/f75/vacuum-lines-43250/)
Just put a new turbo inlet pipe on and in the process. Cracked a few and a few others just don't fit anymore. What would you guys recommend on using as replacements. I know there is a pile of kits out there via ebay and other websites. I've also seen non-premade kits. 3 metes of 4,6,8,12MM hoses. I would like to do the entire engine bay in one pass and not just 7-9 lines from one kit. Any suggestions?
Samco makes good kits, in a variety of colors. But, they are 9 piece kits, but a lot of the hoses in that kit have weird bends that need to be prefabbed.
Theres also HPS that sells silicone hoses in various sizes by 5ft sections: [url]http://www.hps-siliconehoses.com/hps-silicone-vacuum-hoses-silicon-tubing.html?gclid=CMTg1emF3LsCFeg-MgodURwAlA[/url]
|All times are GMT -5. The time now is 08:34 PM.|
Powered by vBulletin®. Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging v3.0.8pl1 (Lite) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.