Subaru WRX Forum

Subaru WRX Forum (http://www.wrxtuners.com/forums/)
-   Bolt-on Tech (EJ255/EJ257 2.5L '04-07 STi and '06-07 WRX) (http://www.wrxtuners.com/forums/f75/)
-   -   Picture of Greddy Type-S bov set up???? (http://www.wrxtuners.com/forums/f75/picture-greddy-type-s-bov-set-up-31604/)

mines2013 11-12-2011 02:36 PM

Picture of Greddy Type-S bov set up????
 
I just installed my Type-S bov. I looked all over the forum for some answers but I got none. All I am getting is the flutter sound out of it. I tried hooking up the lower nipple on it by t-ing into the vacuum port on the intake manifold. I tried adjusting the screw and everything but nothing seems to work. If someone on here has this BOV could you let me know how you have it set up? A picture would be the best. I have an 07 WRX with a TMIC. Thanks in advance. It's dumping to the atmosphere too. (I know it's bad.)

mines2013 11-12-2011 07:44 PM

Sorry for being retarded. I hooked the lower nipple to the boost line connected between the turbo and the wastegate (on the turbo side). Now, It sounds good, but in low boost it flutters. I know this isn't good so does anyone that has this BOV help me out? Thanks.

subiesti07 11-16-2011 07:53 AM

you should go back to the stock bov until you get a recurculation kit for your greddy bov. Another option (and its what im saving up for) is to get a front mount intercooler like perrins and also get their boost tube that allows you to have the greddy bov and vent to the atmosphere safely.

mines2013 11-16-2011 05:05 PM

I think I can find a re-circulation kit so I might do that until I get a bigger turbo so I can run the front mount. Thanks for the input!


All times are GMT -5. The time now is 06:46 AM.

Powered by vBulletin®. Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging v3.0.8pl1 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.