Subaru WRX Forum banner

cobb ap

2K views 2 replies 3 participants last post by  BLACK07STI 
#1 ·
hey i was trying to set up LC on my car and i was wondering cause i tried to do it, and it said i need the test mode connecters pluged in when i try to reflash the ecu
 
#2 · (Edited)
There are 2 green connectors under the dash in line with the steering wheel. Connect them. You have a small connector that came with your AP that is either 1 wire loop or 2. That connects to a connector right near the green ones. This should all be in the manual. Mine is an 02... yours may be a little different.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top