Blouch Dom 4.0R vs Hks Gt 3037

[nutboy]

Any brothers out there using either one of this? Which is better on a 2L build with forged internals and 272 cams?

[basco]

The HKS GT3037 would spool alot faster than the Dom 4...but if your looking for biggest numbers and don't really care about lag than go with the Dom 4...but mind you neither of these is going to spool till around 5000 RPM...IMO if your not going to convert to a twin scroll setup I wouldn't go any larger than an FP Green turbo or there new equivalent for a street car

[turmic]

I agree with matt. That's a huge turbo for a 2.0 to spool.

[nutboy]

oh ok.thanks for the info.how bout the 2.5r?is the td06 25g, 2.5r bigger or 3037.im more to street but i prefer the high end power.cause my current vf22 runs out of breathe after 6k rpm.

[basco]

both of those turbos are big...and if I'm not mistaken both were designed for the STi...you should really look into FP's new HTA series of turbos they spool up pretty well and pull all the way to red line...or you could always go twin-scroll with a huge turbo