Subaru WRX Forum

Subaru WRX Forum (http://www.wrxtuners.com/forums/)
-   Non-Performance Tech (http://www.wrxtuners.com/forums/f73/)
-   -   grill emblem install (http://www.wrxtuners.com/forums/f73/grill-emblem-install-7157/)

jeff04 03-04-2005 03:31 PM

grill emblem install
 
I just got a new grill emblem, but I'm not sure how to remove the stock one without breaking the grill. Anyone changed one before? Any help will be appreciated. Thanks in advance.

Cosmo 03-04-2005 03:58 PM

Use an Xacto or something else thin (a screwdriver will be too big) to pry the edge of it up. It should come off pretty easily once you get it started.

Ian 03-04-2005 04:03 PM

If it has double sided tape you might want to heat it up a little bit, that will make it easier to come off.

jeff04 03-04-2005 04:49 PM

yeah, i tried to use a screw driver, but it was too big. i don't want to brake the grill, so i'm gonna try to heat it up and cut it off. thanks for your help guys.

badgerwrx 03-05-2005 12:22 AM

a butter knife worked very well for me...

Badger

BigJoe68 03-07-2005 09:39 AM

DONT USE A POCKET KNIFE OR A SHARP KNIFE!!!!!!!!!!! I took mine out to put on a billet grill and my pocket knife closed on my hand and i went to the emergency room and got five stitches hahahahaha it sucked royally but its a hilarious story. good luck and dont hurt yourself


All times are GMT -5. The time now is 02:45 AM.

Powered by vBulletin®. Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging v3.0.8pl1 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.