I was installing my Blitz DTT timer/boost gauge over the weekend, and I tucked the little controller in the cubby behind the ash tray. It's a good spot (central, lots of space) and I can see stashing more goodies in there in the future. Thing is, the air bag control module's right there. Anything I should be aware or careful of? I velcroed the controller to the side of the space, so it's not interfering.
It will not hurt the SRS module to install a component beside or around it. As long as nothing rubs the wiring your fine. Be careful with adhesive backed velcro, as it becomes gooey with the extreme heat. You can always secure it with a large zip tie so it doesn't fall down while driving.