Subaru WRX Forum banner

Two dead cylinders

2K views 2 replies 2 participants last post by  p51302 
#1 ·
Hello, I just rebuilt the motor out of a 2010 wrx and after reinstalling the engine it is only running on the two rear cylinders. Have checked the standard spark, fuel and compression just to be sure. The front injectors have power to them but the cylinders are dead. No vacuum leaks, everything is connected correctly. The only thing I can think of at this point is computer or a poor connection somewhere. Any help would be appreciated.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top