built 2.5l help - Subaru WRX Forum
LinkBack Thread Tools Display Modes
post #1 of 1 Old 05-23-2012, 01:57 PM Thread Starter
WRXtuners Member
Join Date: May 2012
Location: New Mexico
Posts: 1
marsstar102 is an unknown
built 2.5l help

I have an 02 wrx non sti with a frankinstine motor in it. the casting numbers on the block say it has an 06 sti block but the heads dont match up. I bought the car like that so im not sure what it has. But piston 3 cracked and was buring oil bad. so I removed the engine and had it rebuilt. now that is is back in it misfires bad on cylinders 1,2, & 4 and has a DTC p0340 for cam shaft sensor bank 1 circuit malfunction. The head that is on the engine does not have a spot for a bank one cam shaft sensor. I have a cobb tunner tune on it. For life of me i cant figure out why it wont run. Its getting spark and fuel. also i was looking through the live data and found bank 3 stft and ltft to be at -100%. Any help would be greatly apreciated.
marsstar102 is offline  
Sponsored Links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome