Subaru WRX Forum banner

HP gain with 16PSI

4K views 3 replies 3 participants last post by  mosc 
#1 ·
I currently have a piggyback ECU that controls everything needed for an MBC. How much more HP should I expect by bumping it to 16PSI instead of the 13.5PSI stock

Also, does a cobbtech AP keep boost at 13.5PSI or does it somehow bump it to 16PSI. I don't have an AP I was just curious if you needed some sort of boost controler with it and if those ratings on their site(265 HP stage 1) is at stock boost or at 16PSI so i can guestimate what I am at.


-Travis
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top