Colorado Emissions Test Issues - Subaru WRX Forum
LinkBack Thread Tools Display Modes
post #1 of 1 Old 02-16-2014, 04:40 PM Thread Starter
WRXtuners Member
Join Date: Jan 2014
Posts: 1
Colorado Emissions Test Issues

Howdy all,

Have an '08 WRX on which I've installed a Cobb downpipe, Borla exhaust system, AEM cold air intake, and using a Cobb access port have downloaded the Stage 2 map specific to the AEM cold air intake. No engine diagnostic lights turn on. Went into to get a Colorado emissions test for the first time with these upgrades. The HC (Hydrocarbons) grams per mile were 1.2616 against a limit of 1.200. The CO (Carbon Monoxide) grams per mile were 31.5774 against a limit of 15.000. The NOx (Oxides of Nitrogen) were 1.9419 against a limit of 1.500. Contacted Cobb's helpline and tried a Stage 1 map specific to the AEM cold air intake and, while it did help, my car still didn't pass the NOx (Oxides of Nitrogent) portion of the test, 1.9607 versus the limit of 1.5000.

Any ran into this issue/have any suggestions on how to best address/overcome this issue?


Kdan is offline  
Sponsored Links

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome