PLEASE HELP! Buschur exhaust

[hondaeater]

no, it's not meant to fit the stock DP, that exhaust looks like a "flat" flange cat back, which will bolt up to many AM DP's, but not the stocker, not without some modification.

Another option is to take intermediate pipe off, and buy one that goes onto the stock DP.

If you look at your catback, it's in two pieces, the intermed pipe, and then the axle back. Some places make an intermediate pipe, just find one that bolts up to the stock pipe and you should be in the business. Then sell yours on ebay

[9d2TSi]

Or just buy the dp from Buschur and be all set.

[BangWRX]

or i can just realize that i'm an idiot and take off the rusted donut gasket that was causing this whole problem. No one could tell this by the pics??

[hondaeater]

the pics weren't very clear, you were right in front of the car! and I ASKED you if you had removed that gasket

so did you get it to seal uP?

[BangWRX]

sorry hondaeater, i thought the gasket was off. This is my first exhaust that ive done and didnt realize that the donut gasket was still on. I'm going today to go pick up a new donut gasket from subaru...hopefully this works

[Nose Nuggets]

let us know.

[BangWRX]

picked up a new donut gasket from subaru today and its sealed up perfectly...no leak. Thanks hondaeater and everyone else for all the help. That was one long catback install

[hondaeater]

glad you finally got it to seal. I bet after all that you were feeling pretty good after you were done aye?