Help with my emissions! - Subaru WRX Forum
LinkBack Thread Tools Display Modes
post #1 of 2 Old 07-28-2011, 06:45 PM Thread Starter
WRXtuners Member
Join Date: Jul 2011
Location: Colorado
Posts: 1
scoobyrex117 is an unknown
Help with my emissions!

Hey guys! im new to this forum! just need a little help with my emissions for obd2 in CO! so my current setup is a full turbo back exhaust. catless uppipe, downpipe and midpipe. Obviously i know i need cats to pass emissions. I dont have any stock emissions equipment besides my downpipe. So will i pass emissions still if i just throw on my stock downpipe? and throw my wrx back to its stock tune instead of my stage 2 that i currently have on? and still leave my up pipe and midpipe catless?
scoobyrex117 is offline  
Sponsored Links
post #2 of 2 Old 10-21-2011, 05:19 PM
WRXtuners Member
Join Date: Oct 2011
Location: California
Posts: 1
Mikol84 is an unknown
Just put it back to stock you don't need the uppipe back in. As long as you have the down pipe with the two catts you will pass on two speed idle. I ref my car in California with just the down pipe and stock exhaust. As long as your stock Catt is still good than you will pass. Just make sure before you get there to smog it run the car on the highway or 20 mins of driving to get the Catt hot. And just leave it idling so the Catt stays hot when you get there. Revert the map to stock.
Mikol84 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome