boost issue (i think it cleared)

phatmike0704 · 09-16-2009, 10:34 AM

so i got retuned becuz i had an up pipe leak and was only hittin 13 psi. but when i went to the retune i was only hittin about 1 bar. i thought it was my tmic ### it didnt look aligned. so i m drivin today and my boost gauge hits 0 bar at idle and shuts off. i knew it was a boost leak so i pop the hood and the intercooler hose is off the turbo loll. so i call my frends to help push home lol. we get the intercooler bak on and aligned properly this time.
here's the weird part, i give it a test run and gun it. im still only hittin 1 bar then i realized that i only hit full boost(20 psi) at 6500-7k rpm. is it ### my tuner didnt finish tuning it to 20 psi or another leak?

pzr2874 · 09-16-2009, 11:59 AM

What BPV are you using and did you replace your solenoid?

phatmike0704 · 09-16-2009, 01:28 PM

ebay type rs, the tuner tweaked wit it a bit ### he thought that was the problem too. i got a grimmspeed 3 port

pzr2874 · 09-17-2009, 02:08 PM

So the 3port is tuned for ? Look into a Forge Full recirc.... Best out there so many have found out.

Or put the stocker back on to see if that helps.

phatmike0704 · 09-19-2009, 10:09 AM

yup tuned with it. i was thinkin to go to recirc valve