Subaru WRX Forum banner

Default TRAC(tion) Mode and VDC to OFF mode - 2017 Subaru WRX

9K views 1 reply 2 participants last post by  RoboTuner 
#1 ·
How to default the TRAC(tion) mode and VDC to OFF mode on 2017 Subaru WRX?

Every time I start the ignition, I need to press the VDC Off switch to have TRAC mode and VDC mode off. How can I make it as a default and switch those ON whenever I need it.

I don't need those computer gimmicks to interfere during my normal days and just needs them when I really need them.

Thank you.
 
#2 ·
If you know how to program and are good with electronics then you could make an arduino sense ignition voltage and program it to pulse the required signal to the switch circuit. FYI, if you don't know what you're doing or working with, you'll end up frying the ECU. Quit being lazy and deal with your "new" model and it's "safety" features, if you didn't want them, you should have gotten a GD wrx.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top