|
installed tanabe gf210 - clunk problem
I installed my Tanabe GF210 on stock struts with 04 STi tophats last week. I've had clunking almost on all 4 corners which prompted me to buy a torque wrench and make sure all nuts were tightened.
Everything was tightened to spec, but I still get clunking in the rear on driveways, speedbumps, small dips (Barely noticeable if the radio is on). All springs are aligned in the housing, and orientation of everything is verified correct. I am at a loss at what it could be.
Any help is greatly appreciated.
|
Linear Mode
