Subaru WRX Forum banner

AEM failsafe wiring on 09/10 WRX

4K views 3 replies 2 participants last post by  WRX-CS10 
#1 ·
Hi all, having difficulty finding answers on wiring in the rpm and data logging wires for the AEM Failsafe!

I have a 2010 CS10 and successfully installed the gauge but can't find wiring diagram for the rpm wire.

I was hoping this gauge would work in RomRaider but it doesn't show up as a com device :(

Just wondering if anyone has installed one on an 09/10 and can advise on wiring in the green rpm wire, and if the yellow boost and white afr analog output cables can be plugged into the ECU for direct logging with Romraider or other method?

Cheers,
 
#2 ·
#3 ·
Yeah I saw in Romraider there is a selection for AEM, but think its for just the afr model, not failsafe! At the moment I'd be happy finding the rpm cable to get more resolution in the fail safe software, ECU out and pulled apart the dash but can't tell what colour cable is for rpm!!

Lucky dip? !!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top