Valve Lash on 2004 wrx HELP!
I am doing a hybrid build and had my buckets laid out on a table in order. The table got bumped and I now have all the buckets mixed up. I talked to Tim Bailey and he said on a Aftermarket cam setup he shoots for .004-.006 on the intake and .006-.0012 on exhaust. That help me narrow it down but once I got what I thought was the correct intake and exhaust buckets and toqued the cam caps in place the .005 feeler gauge(smallest I have) would not even begin to think of going in on the intake. The exhaust buckets appear to be still be fine when using the .010 gauge on them. Any help is greatly appreacited.
|All times are GMT -5. The time now is 02:16 PM.|
Powered by vBulletin®. Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.0.8pl1 (Lite) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.