Subaru WRX Forum

Subaru WRX Forum (http://www.wrxtuners.com/forums/)
-   Cylinder Head & Short Block (http://www.wrxtuners.com/forums/f103/)
-   -   06 wrx 2.5 block (http://www.wrxtuners.com/forums/f103/06-wrx-2-5-block-20569/)

ferrari2479 10-09-2007 02:11 PM

06 wrx 2.5 block
 
I have a 06 wrx and i want to go rotated with a gt30r .82a/r. Would i be able to run this turbo on my block but with upgraded pistons and rods. would i have to go with the axis stage 2 block. Could i use my 06 wrx heads wiht the axis stage 2?? Would would you guys recomend for this. Thanx

LiL Shoaf 10-09-2007 02:25 PM

What kind of boost levels are you planning run with the flow out of that GT30R (good turbo)..

with under 20psi or so you should be fine (depending on abuse)

Above 21psi I would suggest at least forged pistons.

An Axis Stage 2 is a nice block but I don't think you need to drop the cash..

Your heads would bolt to an Axis Stage 2 block..

ferrari2479 10-09-2007 02:29 PM

I was planning on 400-450whp. I didnt know that i could run that much power on the stock block.

LiL Shoaf 10-09-2007 02:36 PM

Ron at Axis will NOT try to sell you what you don't need.. Shoot him a call, he knows the differences between the New 2.5L wrx and the STI block better then I..

ferrari2479 10-09-2007 07:49 PM

okay thanx man for all your help

06resuby 02-03-2008 02:57 PM

i just finished my rebuild on my 06 wrx i have a rotated gp moto turbo a lil bigger than gt30r i got forged pistons weisco 100mm,main and rod barrings,stock rods they hold 600hp and stock heads jus re surfaced them and no problems


All times are GMT -5. The time now is 06:50 AM.

Powered by vBulletin®. Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging v3.0.8pl1 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.