[AZ-Scoob]

ok kids, took my CAI out of mothballs and put it back on. 2 days later, pow a CEL p0171 system lean bank 1. took off the pipe that goes into the fender, clamped the filter to the pipe inside the engine bay (with the bend before the meter), cleared the code and drove the car. 4 drive cycles later, pow the same code! took off the shortened CAI pipe, cut the bend off before the MAF sensor, reclamped the filter and drove it again. been 4 days, no cel, no wierd off-idle problems, no very high EGT's, everything is ok so far! although I butchered up an expensive CAI, I wanted to see if the bend in the pipe really was the problem. so far it was...will keep everyone posted if I get a CEL.