Ok well to add to this, I took all the advice and thoughts, shopped around some, takled with the girlfriend and decided to not go with the engine build. I am still going with the transmission, clucth and flywheel though. Since I will be saving alot of money by not doing the engine I figured the next logical step would be some suspension upgrades. So I know sways and endlinks are a must. So I have been trying to do some research and read up on reviews. I came across some Perrins in a front/rear combo:
Perrin Performance - Sway Bar Combo F&R 25mm Any thoughts on these? I also want to lower and stiffen up the ride some, so I saw these on their site also:
Perrin Performance - Coilovers PERRIN / H&R and also get the camber bolts that are recommended on the page. The height drop isnt that bad I figure, being around an inch front and rear. Now I do plan to eventually track the car, get some driving lessons. I figured this setup with the power Im now making would be a decently rounded car with just some upgraded pads/rotors/lines when the time comes to change them out. Guess Im just aksing for opinions again. Thanks everyone.
