|
So I should have some kind of y shaped hose? Connecting the metal nipple, the PVC valve, and the T nipple by the coolent, correct?
Underneath the throttle body there is a black plastic piece with a slanted black nipple (I mentioned in the other thread) and another larger nipple above it. The whole piece is about 3-5 inches. The larger nipple above the slanted one had a 90 degree elbow on it that looked like it lined up perfectly with the PVC valve, so that's where we put it. (I don't think I ever took off that 90 degree elbow from the upper nipple, so I thought it had been there since I took it apart.)
So when you say splits into 2, do you mean the plastic assemply with 2 nipples that I meant? Or is there a Y hose or something?
Then we connected the slanted nipple to the metal nipple on the block. That left the hose and the T nipple in the pics without mates though. So, Is this wrong?
|
