|
Vacuum lines and clutch ?
Almost done with the build. 4 little issues and my rebuild will be done.
1)
This is a peice of the vacuum assembly that bolts to the intercooler, then 90's over by the turbo coolant resevoir (this is the area you are looking at). Where does this nipple go?
(1st pic)
2)
This is a hose that comes off of the driver side motor assembly that opens the butterfly mechanism's in the intake, directly below the driver front corner of the intercooler. It is a terrible pic, sorry. Where does it go to?
(2nd pic)
3)
I depress my clutch and it stays there, the pedal doesn't come back up, but I can pull it up. My friedn thinks we missed some kind of spring assembly. Ideas?
4)
I need to re-tighten the oil filter assembly. I started the car and it blew my expensive pretty purple oil all over the floor past this seal. I just thought I'd share, obviously I can fix this one.
|
