So my buddy and I decided to make a better path to cold air than what was on the car. Since we live in San Antonio and cold air is not very abundant this is the solution we came up with. $20 at Home Depot. We figure it'll be better than nothing.
First we got all of the supplies...
Dryer hose (mandatory for any intake
)
A vent
Black spray paint
Misc hardware
Kitty did the inspection of all the parts
Trusty Deflecto
We painted the vent with the black spray paint
Then we cut a hole under the bumper to fit the vent into
Then ran the hose up the side of the fender
Screwed the vent into place...
Then attached the hose
Dyno proven for 25whp.
