|
You need to manually control the boost. Install the ABC, switch to a closed loop boost, start at 100 through 1000rpm-4000rpm, then turn the abc up until the desired boost is reached. If your ABC is always closed and you are still over boosting (don't see how at 100) start at 30 on your UTEC Boost Control Map, then work the ABC up. If you need detailed intructions, as always, my phone number is in my profile.
-kobi
p.s. If you would be willing to meet halfway, I could do an entire tune up on your UTEC to get you max gain, if you have an EGT probe installed.
-kobi
____________________________
-kobi
|