EDIT : go to last page for the lastest info
What NOT to put on your
2006 wrx TR
MOD LIST:
TBE
Big 16g
MBC
Apexi SAFC........................Just took it off
HKS fuel cut defensor..........Just took it off
Grounding mod
FMIC w/ CAI
BOV
OK this is what happened....
All of these mods have been installed for a few months WITH no problems at all
and all of a sudden last week it started to run like crap when takeing off from a dead stop would studder and barly move....BUT if i reved the motor first and kept a higher steady RPM it would take off FINE ......THEN it seemed like if I TURNED OFF the AC that it would work good........
THEn it started to get worse...even with the AC off it still studdered ....and now no matter what i do IT does it all the time ...I can get it to higher rpms when moveing and it gets a LITTLE better but sounds/ feels like it may only be running on 3 cyl's
AND the whole time I hae been throwing a ( MISS FIRE CODE) P 304
I reset the ECU and it doesnt REALLY seem to help.. the CEL will come back on in a few miles.....but it doesnt come RIGHT back on....
I was thinking it might be a fouled plug ### i have it tuned RICH at high rpms/boost and the BOV makes it run REALL rich in between Shifts.......
I have read on here and seems like people have been haveing problems with the SAFC ( is that right away or did it take a while to happen ????)
ANYWAYS please help out guys ...thats alot!!!!!
EDIT :
i pulled 2 of the spark plugs ( the easy ones on the pass. side).
and thay both look the same ...thay look fine ..good really ..THEY ARE red or orange ( thats good right? )
?????????????
it looks like thay would spark fine!
so now I am scared!!!!!!!!
AND the CEL code is P304....I am not sure about the 2006 wrx ..but i think thats the #4 cyl .....RIGHT???? and if so ..is the #4 in the back on the Driver side?
ALSO ....Does anyone know what the WHITE wire on the Throtle bodydoes ( where the big clip plugs in on the throttle body) .. its right next to the Turbo ....### when I put mu FMIC pipe on it rubed up again it and cut into it ..and was ( KINNA ) shorting out ...but it dodnt mak any difference...I didnt notice for a week or so when I took the pipe off . and then I fixed it so it wasnt touching anything any more...... WHAT DOES THE WIRE CONTROLL.....i AM HOPEING THAT I DIDNT MESS MY ECU UP WITH THAT ( i doubt i did ..but ..I am still scared )